Enabling And Disabling Event Logging; Table 10.9: Access Control Events; Table 10.10: Session Events - Avocent DSView Installer/User Manual

Table 10.9 lists the access control events that may occur within a DSView 3 software system.

Table 10.9: Access Control Events

Event ID
8:1
Table 10.10 lists the session events that may occur within a DSView 3 software system.

Table 10.10: Session Events

Event ID
9:1
9:2
9:3
9:4
9:10

Enabling and Disabling Event Logging

The logging of events occurring in the DSView 3 software system may be enabled or disabled.
When an event is disabled, its state will appear as Disabled and the event will not be logged until it
is reenabled.
You may change the number of items that display in the Enabled Log Events window by clicking
the Customize link. See Using the Customize link in windows on page 12.
To enable or disable logging of one or more events:
1. Click the Reports tab.
2. Click Enabled Events in the side navigation bar. The Enabled Log Events window will open,
listing all enabled and disabled log events.
3. Click the checkbox to the left of one or more events. To select all events on the page, click the
checkbox to the left of Log Event at the top of the list.
4. Click Enable or Disable. (Events cannot be enabled unless they are already disabled.
Similarly, events cannot be disabled unless they are already enabled).
The Enabled Log Events window will refresh with the new information.
Description
Access rights modified
Description
Session started
Session stopped
Session terminated
Session preempted
Global macro group added
Chapter 10: Event Logs
Event ID Description
Event ID Description
9:11 Global modified
9:12 Global macro deleted
9:20 Global macro group added
9:21 Global macro group modified
9:22 Global macro group deleted
293