Patton electronics IPLink 3210 Series Getting Started Manual page 89

IPLink 3210 Series Getting Started Guide
The command has optional values (in the range of 1 to 4) that define the level of detail (see
Note
You can enable queue statistics for all queues of a link scheduler by placing the
mand in the profile header. Queue statistics are reset whenever the configuration is changed or IPLink is
reloaded.
Mode: Source
Step
node (src)[ name ]#debug queue statistics level Enables statistic gathering for the selected class
1
Example: Enable statistics gathering for all queues of a profile
The following example shows how to enable statistic gathering for all traffic-classes
3210>enable
3210#configure
3210(cfg)#profile service-policy sample
3210(pf-srvpl)[sample]#debug queue statistics 4
Link scheduler configuration task list
Table 14. Values defining detail of the queuing statistics
Optional Value Implication on Command Output
0 Statistic gathering is switched off
1 Display amount of packets passed (did
not have to wait), queued (arrived ear-
lier than rate permitted) and discarded
(due to overflowing queue)
2 Also collects byte counts for the catego-
ries listed above
3 Also keeps track of the peek queue
lengths ever reached since the last con-
figuration change or reload
4 Adds delay time monitoring
The debug features offered by IPLink require the CPU resources of
your IPLink router. Therefore do not enable statistic gathering or
other debug features if it is not necessary. Disable any debug feature
after use with the form of the command.
no
Command
7 • Link scheduler configuration
debug queue statistics
Purpose
or policy name . The optional argument level ,
which is in the range from 1 to 4, defines the ver-
bosity of the command output.
table 14).
com-
89