Ethernet 10Base-T And 100Base-T; Ethernet Cross-Over - Patton electronics IPLink 3210 Series Getting Started Manual

IPLink 3210 Series Getting Started Guide

Ethernet 10Base-T and 100Base-T

Ethernet devices (10Base-T/100Base-T) are connected to the IPLink over a cable with RJ-45 plugs. Use a
cross-over cable to a host, or a straight cable to a hub. See
the different connections.
Twisted pair 1
Twisted pair 2
Ethernet 10Base-T and 100Base-T
RJ-45, male
Tx+ 1
Tx- 2
Rx+ 3
Rx- 6
Figure 25. Ethernet cross-over
figure 25 (host) and
Cross-over cable
C • Cabling
figure 26 on page 106 (hub) for
Host
RJ-45, male
1 TX+
2 TX-
3 RX+
6 RX-
105