Patton electronics IPLink 3210 Series Getting Started Manual page 39

IPLink 3210 Series Getting Started Guide
After the IPLink VPN Router has been rebooted the new start up configuration will be activated.
172.16.1.99(if-ip)[eth0]#reload
Running configuration has been changed.
Do you want to copy the 'running-config' to the 'startup-config'?
Press 'yes' to store, 'no' to drop changes : no
Press 'yes' to restart, 'no' to cancel : yes
The system is going down
3. Load configuration
3 • Getting started with the IPLink
39