Corporate Multi-Function Virtual Private Network - Patton electronics IPLink 3210 Series Getting Started Manual

IPLink 3210 Series Getting Started Guide
To configure this application, you need to configure the following features:
• The WAN port with Frame Relay as the encapsulation protocol
• An IPSec VPN between the two endpoints.
See chapter 4 on page 40 to configure the serial port and

Corporate multi-function virtual private network

The IPLink 3210 Series can deliver both private corporate intranet service and public Internet access to multi-
ple remote sites by leveraging IPLink's multiple frame-relay PVC support (see
the benefits of secure multi-office virtual private networking with QoS for prioritized traffic flow for mission-
critical information.
In figure 6, the blue pipes represent VPN connections for private traffic within the corporate intranet, while
the green pipes represent the Internet traffic. The red pipe is a Frame Relay PVC transporting Internet traffic
and private corporate traffic over the VPN. Each of the three remote sites is connected with headquarters via an
IPLink VPN router. Each remote site can take advantage of the most convenient and locally available interface
the WAN service can offer.
Applications overview
Figure 6. Corporate multi-function virtual private network
chapter 5 on page 45 to configure the VPN.
figure
1 • General information
6). The enterprise enjoys
24