IPLink 3210 Series Getting Started Guide
Introduction
This section provides pin-out information for the ports of the IPLink router.
Console port, RJ-45, EIA-561 (RS-232)
The RS-232 serial console port of the IPLink is configured to operate as a DCE. View the image in
showing the RJ-45 receptacle with the numerical identification of the pin numbers and functions.
Refer to
table 17
which tabulates the pin number, signal name and the direction of the signal.
Introduction
8–RTS
7–CTS
6–TD
5–RD
4–SG
3–DTR
2–CD
1–DSR
1 2 3 4 5 6 7 8
Figure 27. EIA-561 (RJ-45 8-pin) port
Table 17. RS-232 Console Port
Pin No.
Signal Name
1
DSR
2
CD
3
DTR
4
Signal Ground -
5
RD
6
TD
7
CTS
8
RTS
Signal
Direction
from IPLink
from IPLink
to IPLink
from IPLink
to IPLink
from IPLink
to IPLink
D • Port pin-outs
figure 27
108