Introduction; Serial Console; Connecting A Serial Terminal - Patton electronics IPLink 3210 Series Getting Started Manual

IPLink 3210 Series Getting Started Guide

Introduction

This section provides information on the cables used to connect the IPLink to the existing network infrastruc-
ture and to third party products.
CAUTION

Serial console

The IPLink can be connected to a serial terminal over its serial console port, as depicted in
Note
Introduction
The interconnecting cables must be acceptable for external use
and must be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
e r
u t
R o
P N
k V
L i n
I P
o le
n s
C o
1
e t
E n
0
e t
E n
Figure 24. Connecting a serial terminal
See section "Console port, RJ-45, EIA-561 (RS-232)"
for console port pin-outs.
Note A Patton Model 16F-561 RJ45 to DB-9 adapter is included
with each IPLink Series device
C • Cabling
figure 24.
Serial Terminal
on page 108
104