Menu Menu - Panasonic AJ-HD1500P Operating Instructions Manual

Setup menus
USER menu
<MENU>
No.
A00
A01
A02
A03
The underline on the setting item denotes the initial setting.
<Notes>
• No. A00 (LOAD), No. A01 (SAVE) and No. A02 (P.ON LOAD) are the menu items which can
be set only for USER1. They are not displayed with the USER2 – USER5 files.
• No. A03 (MENU LOCK) is the menu item which can be set only for the USER2 – USER5
files. It is not displayed with USER1.
Item Setting
Superimposed Superimposed
No.
display display
LOAD 0000
0001
0002
0003
SAVE 0000
0001
0002
0003
0004 LOCKED
P.ON LOAD 0000
0001
0002
0003
0004
MENU LOCK 0000
0001
– 102 –
USER2 This selects the user file whose contents will be loaded into
USER3 USER1.
USER4 0: The USER2 file contents are loaded.
USER5 1: The USER3 file contents are loaded.
2: The USER4 file contents are loaded.
3: The USER5 file contents are loaded.
<Note>
When the SET button is pressed after loading, the setting will
be stored in the memory. When the MENU button is pressed,
the setting will not be changed.
USER2 This selects the user file into which the USER1 settings will be
USER3 saved.
0: The settings are saved in USER2.
USER4
USER5 1: The settings are saved in USER3.
2: The settings are saved in USER4.
3: The settings are saved in USER5.
4: This display appears when all the user files are in the
change prohibit status.
<Notes>
• User files whose status have been set to change prohibit
cannot be selected.
• When all the user files are in the change prohibit status, the
"LOCKED" display appears and the contents cannot be
saved.
This loads the contents of the selected user file into USER1
OFF
USER2 and it starts operation with the USER1 settings when the
USER3 power is turned on.
USER4 0: Operation is started with the settings of the previously set
USER5 user file.
1: The contents of USER2 are loaded into USER1 and
operation is started with the USER1 settings.
2: The contents of USER3 are loaded into USER1 and
operation is started with the USER1 settings.
3: The contents of USER4 are loaded into USER1 and
operation is started with the USER1 settings.
4: The contents of USER5 are loaded into USER1 and
operation is started with the USER1 settings.
This selects whether to set or release the user file (USER2 –
OFF
ON USER5) lock mode.
0: The lock is released (changes can be made).
1: The lock is set (changes are prohibited).
<Note>
The lock cannot be set for USER1.
Description