Table of Contents
Advertisement
Operations using the front panel bottom controls
The desired status information and setup menu items can registered in the STATUS 1 to 3
buttons
and SAVE/EXIT buttons
the VTR status display area
to 4 buttons
Items which can be registered
The following items can be registered in the buttons.
•
STATUS:
•
PROG MENU: Up to 9 items from setup menus in the 000 range to 700 range can be
Registration method
The items are registered as they are selected by the menu-driven system. Connect the TV
monitor to the VIDEO OUT3 connector in the unit's connector area and display the
registration menu.
1
2
and PROG MENU 1 to 4 buttons
. Once the information has been registered, it can be indicated on
concerned.
PROG
SAVE/
SET UP
STATUS
MENU
EXIT
1
Up to 9 items including the recording format and playback format can be
registered in these buttons.
descriptions of the items and contents.)
registered in these buttons. However, the submenus of setup menu item
No.680 (BLANK LINE) cannot be registered.
Press the SETUP button.
The message indicating that the registration steps can now be commenced appears on
the TV monitor.
-ASSIGNMENT MODE-
select any key!
MENU
STATUS :<STATUS>
EXIT
Select the button which corresponds to the objective.
•
PROG MENU buttons:The registration menu for registering the setup menu items in
the PROG MENU 1 to 4 buttons is displayed.
•
STATUS buttons:
The registration menu for registering the VTR status
information in the STATUS 1 to 3 buttons is displayed.
•
SETUP buttons:
This cancels the registration operation.
by using the SETUP, STATUS, PROG MENU
by pressing the STATUS 1 to 3 buttons
PROG MENU
STATUS
2
3
1
2
3
4
(Refer to the VTR status item table for
:<PROG MENU>
:<SETUP>
– 18 –
or PROG MENU 1
MODE/SEL EXIT
MENU SET
DIAG
Advertisement
Table of Contents
