Panasonic AJ-HD1500P Operating Instructions Manual page 99

Setup menus
USER menu
<AUDIO>
No.
745
746
747
748
749
750
751
752
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
MONI CH 0000
SEL 0001
0002
MON AUTO 0000
SEL 0001
0002
MONI SEL 0000
INH 0001
0002
AUDIO PB 0000
VR 0001
ANA CH1 0000
SEL 0001
ANA CH2 0000
SEL 0001
ANA CH3 0000
SEL 0001
ANA CH4 0000
SEL 0001
– 99 –
MANU This selects monitor output type.
0: The type of output selected for MONITOR SELECT is
AUTO
output.
PCM
1: PCM AUDIO is selected within the –1.0
range during playback of DVCPROHD-LP tapes; CUE is
automatically selected for all other tape modes.
2: PCM AUDIO is selected for the –32
<Notes>
• When AUTO is selected, PCM AUDIO is provided within the
–1.0 to i1.1 speed range during playback of tapes other
than DVCPROHD-LP.
• This setup menu item takes effect when one of CH1 to CH8
has been selected by the L and R MONITOR SELECT
switches on the front panel.
(If CUE has been selected, the cue signal will be output at all
the speeds regardless of the setup menu item's setting.))
If AUTO has been selected for setup menu item No.745
L/R
(MONI CH SEL), the CUE signal is automatically sent to the
L
monitor output in accordance with the operation mode but this
R
item selects the monitor channel which will be automatically
switched to CUE.
0: The CUE signal is output to both the left and right channels.
1: The CUE signal is output to the left channel only.
2: The CUE signal is output to the right channel only.
This selects whether to enable or disable the MONITOR
OFF
SELECT button on the front panel.
ON
0: The button's operation is enabled.
ON1
1: The button's operation is disabled.
2: In the FULL display mode, the button's operation is
disabled; operation is enabled in the FINE display mode
only.
DIS This selects whether the playback level controls are to work in
the EE mode when INT SG has been selected as the setup
ENA
menu item No.700 (AUDIO IN SEL) setting.
0: The INT SG output level is fixed at UNITY.
1: The INT SG output level can be varied using the playback
level controls.
<Notes>
• When 0 (DIS) is selected in setup menu No.760 (AUDIO
VRCONT), the output level of INT SG is fixed at UNITY
irrespective of the present setting.
• When 2 (MUTE) is selected in setup menu No.760 (AUDIO
VRCONT), the output level of INT SG is muted irrespective
of the present setting.
CH1 This selects the signals to be output to analog output CH1.
CH5 0: The CH1 signals are output.
1: The CH5 signals are output .
CH2 This selects the signals to be output to analog output CH2.
CH6 0: The CH2 signals are output.
1: The CH6 signals are output .
CH3 This selects the signals to be output to analog output CH3.
CH7 0: The CH3 signals are output.
1: The CH7 signals are output .
CH4 This selects the signals to be output to analog output CH4.
CH8 0: The CH4 signals are output.
1: The CH8 signals are output .
Description
to i2.0
to 32 speed range.
speed