Table of Contents
Advertisement
Setup menus
SYSTEM menu
<SYSTEM>
No.
00
01
Submenu screen for 01 (PARA IN) menu
00
01
02
03
04
05
06
07
08
09
The underline on the setting item denotes the initial setting.
Item
Setting
Superimposed
Superimposed
No.
display
display
WFM SEL
0000
0001
0002
0003
0004
0005
0006
0007
PARA IN
0000
(PIN1)
0000
(PIN2)
0000
(PIN3)
0000
(PIN4)
0000
(PIN5)
0000
PIN6
0000
0001
DC FIT_H
0002
UC FIT_H
0003
UD FIT_H
PIN7
0000
0001
DC FIT_V
0002
UC FIT_V
0003
UD FIT_V
PIN8
0000
0001
422 REM ON
PIN9
0000
0001 422 REM OFF
(PIN10)
0000
LOCAL ENA
– 65 –
CTL
This selects the signal to output from the VIDEO OUT 2
TC
connector.
VIDEO
0: The CTL signal is output.
SYNC
1: The TIME CODE signal is output.
2: The VIDEO OUT signal is output.
RF-L
3: The SYNC signal is output.
RF-R
ENV-L
4: The PB L RF signal is output.
ENV-R
5: The PB R RF signal is output.
6: The PB L ENV signal is output.
7: The PB R ENV signal is output.
<Note>
1. The settings can be changed at any time regardless of the
setup menu item No. 30 (MENU LOCK) setting.
2. The signals which are output during normal playback have
approximately the levels given below.
CTL: 0.1 to 0.3 Vp-p
VIDEO: 1.0 Vp-p
<SUB>
For allocating what is to be controlled by the pins of the
PARALLEL REMOTE connector. When the STOP button is
pressed, the display transfers to the submenu screen, and
what is to be controlled is selected for each of the pins. To
return from the submenu screen, press the STOP button
again.
0: Used simultaneously with PIN 2 (PLAY); transfers operation
REC
to the recording mode.
0: Transfers operation to the play mode.
PLAY
0: Transfers operation to the fast forward mode.
FF
0: Transfers operation to the rewind mode.
REW
0: Transfers operation to the stop mode.
STOP
0: No control exercised.
––––
1: Switches the picture frame during down-conversion to the
letter box mode.
2: Cuts the top and bottom of the picture frame during up-
conversion in respect of the vertical direction.
3: Switches the picture frame during down-conversion to the
letter box mode and cuts the top and bottom of the picture
frame during up-conversion in respect of the vertical
direction.
––––
0: No control exercised.
1: Switches the picture frame during down-conversion to the
side-cut mode.
2: Switches the picture frame during up-conversion to the side
panel mode.
3: Switches the picture frame during down-conversion to the
side-cut mode and switches the picture frame during up-
conversion to the side panel mode.
––––
0: No control exercised.
1: The 9-pin remote function is enabled.
––––
0: No control exercised.
1: The 9-pin remote function is disabled.
0: Enables all the buttons that can be operated on the front
panel except for RECORDER and PLAYER in the
REMOTE mode.
Description
TC: 0.6 Vp-p
Advertisement
Table of Contents
