Panasonic AJ-HD1500P Operating Instructions Manual page 73

Setup menus
USER menu
<BASIC>
No.
006
007
008
009
010
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
DISPLAY 0000
SEL 0001
0002
0003
0004
0005
0006
CHARA 0000
:
H-POS
0006
:
0037
CHARA
V-POS 0000
:
0023
:
0032
CHARA 0000
TYPE 0001
MONI 0000
CONTROL 0001
– 73 –
TIME This selects what displays such as the time code are to be
T&STA superimposed onto the HD SDI MONITOR, SD SDI
MONITOR and VIDEO OUT3 connector signals.
T&S&M
0: Time only
T&RT
T&YMD 1: Time and operation mode
T&MDY 2: Time, operation mode and mode
T&DMY 3: Time and REC TIME
4: Time and REC DATE (year, month, day)
5: Time and REC DATE (month, day, year)
6: Time and REC DATE (day, month, year)
<Note>
1. The following modes are displayed in accordance with the
format used.
<Format>
DVCPROHD-LP
DVCPROHD
DVCPRO50
DVCPRO
DV
DVCAM
2. With the 2 (T&S&M) setting, an error message is displayed
when a warning or error has occurred.
3. REC TIME and REC DATE are displayed only in DV/DVCAM format
playback mode. Operation mode is displayed in DVCPROHD-LP/
DVCPROHD/DVCPRO50/DVCPRO format mode.
0 This selects the horizontal position of the characters used for
:
the time code and other displays which are superimposed
onto the HD SDI MONITOR,, SD SDI MONITOR, and VIDEO
6
:
OUT3 connector signals.
37 <Note>
1. When this item has been set, the output is given to each
OUT3 connector in a state of DISPLAY SEL even with
SUPER OFF. However, when MENU is exited, the displays
comply with the SUPER OFF or ON setting.
CHARA TYPE is output to the each OUT3 connector in the
status set on the MENU.
This selects the vertical position of the characters used for the
0 time code and other displays which are superimposed onto
:
the HD SDI MONITOR, SD SDI MONITOR and VIDEO OUT3
23 connector signals.
:
<Note>
1. When this item has been set, the output is given to each
32
OUT3 connector in a state of DISPLAY SEL even with
SUPER OFF. However, when MENU is exited, the displays
comply with the SUPER OFF or ON setting.
CHARA TYPE is output to the each OUT3 connector in the
status set on the MENU.
This selects the display type for the SETUP MENU, etc. and
WHITE
W/OUT the displays superimposed onto the HD SDI MONITOR, SD
SDI MONITOR and VIDEO OUT3 connector signals.
0: White characters on a black background
1: White characters with black edges
MANU This sets whether the recorder is to be forcibly set to the EE
status and the player's playback signals are to be output to
AUTO
the monitor by pressing the PLAYER button on the recorder
when the monitor has been connected only to the recorder
during deck-to-deck editing.
0: The EE status is not forcibly established.
1: The EE status is forcibly established, and the player's
playback signals are output.
Description
<Display>
#
DVCPRO_HD-LP
#
DVCPRO_HD
#
DVCPRO_50
#
DVCPRO
#
DV
#
DVCAM