Table of Contents
Advertisement
Setup menus
SYSTEM menu
<SYSTEM>
No.
10
11
12
13
14
15
16
17
18
19
20
21
22
02
Submenu screen for 02 (PARA OUT) menu
00
01
02
03
04
05
06
The underline on the setting item denotes the initial setting.
Item
Setting
Superimposed
Superimposed
No.
display
display
PIN11
0000
0001
PIN12
0000
0001
R INH OFF
(PIN13)
0000
R INH ON
(PIN14)
0000
PRE INH ON
PIN15
0000
LOCAL DIS
0001 LOCAL UMAP
(PIN16)
0000
(PIN17)
0000
PIN18
0000
0001
DC FIT_HV
0002
UC FIT_HV
0003
UD FIT_HV
PIN19
0000
0001
PIN20
0000 STBY ONOFF
0001
STBY ON
(PIN22)
0000
PIN23
0000
0001
(PIN25)
0000
STBY OFF
PARA OUT
(PIN21)
0000
(PIN24)
0000
(PIN27)
0000
(PIN28)
0000
(PIN29)
0000
(PIN30)
0000
(PIN31)
0000
– 66 –
––––
0: No control exercised.
EJECT
1: Transfers operation to the EJECT mode.
IN SET
0: Records the edit IN point.
1: Enables recording on a cassette tape when the tape's
accidental erasure prevention mechanism has been set to
recording enable.
0: Inhibits recording on the cassette tape.
0: Inhibits overwriting during normal recording.
0: Disables all operations performed using the front panel
buttons in the REMOTE mode.
1: Enables the operation of only the STOP and EJECT
buttons on the front panel in the REMOTE mode.
TC EXT
0: Uses the external time code which is input from the time
code input connector.
TC INT
0: Uses the time code of the internal time code generator.
––––
0: No control exercised.
1: Switches the picture frame during down-conversion to the
squeeze mode.
2: Switches the picture frame during up-conversion to the
stretch mode.
3: Switches the picture frame during down-conversion to the
squeeze mode and the picture frame during up-conversion
to the stretch mode.
––––
0: No control exercised.
1: Transfers operation to the still picture (STILL) mode.
STILL
0: Transfers operation alternately between the STANDBY ON
and OFF modes.
1: Transfers operation to the STANDBY ON mode.
HALF
0: Switches operation in the tape protection mode to half
loading when the unit has been left standing in the STOP
mode or STILL mode in one of the search modes (JOG,
VAR or SHTL).
0: Transfers operation from the IN point to the PREROLL
CUE
mode when the IN point has been entered or when and
T-REL
from the current point to the PREROLL mode when the IN
point has not been entered.
1: Switches operation in the tape protection mode to tension
release when the unit has been left standing in the STOP
mode or STILL mode in one of the search modes (JOG,
VAR or SHTL).
0: Transfers operation to the STANDBY OFF mode.
<SUB>
For allocating the statuses to the pins of the PARALLEL
REMOTE connector. When the STOP button is pressed, the
display transfers to the submenu screen, and what is to be
controlled is selected for each of the pins. To return from the
submenu screen, press the STOP button again.
ERR0
0: Error status 0
0: Error status 1
ERR1
0: Record status
REC
0: Play status
PLAY
0: Fast forward status
FF
0: Rewind status
REW
0: Stop status
STOP
Description
Advertisement
Table of Contents
