User Menu; Basic Menu - Panasonic AJ-HD1500P Operating Instructions Manual

Setup menus

USER menu

<BASIC>
No.
000
001
002
003
004
005
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
P-ROLL 0000
TIME :
0005
:
0015
LOCAL 0000
ENA 0001
0002
TAPE 0000
TIMER 0001
REMAIN 0000
SEL 0001
0002
0003
SYNCHRO- 0000
NIZE 0001
SUPER 0000
0001
0002
– 72 –
0S This sets the preroll time which can be set from 0 to 15
: seconds in 1-second increments.
5S <Notes>
1. When the unit is set to automatic editing [PREVIEW, AUTO
:
15S EDIT], the unit will not operate if the preroll time is set to 0
seconds.
2. When editing with the phase synchronized between two
decks using
(SYNCHRONIZE) setting, the preroll time must be set to at
least 2 seconds.
DIS This selects the buttons which can be operated on the front panel
ST&EJ when the REMOTE/LOCAL switch has been set to REMOTE.
ENA 0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons except for the RECORDER and PLAYER
buttons can be operated.
±12h This selects the 12 or 24 hour display for the CTL counter.
24h 0: 12 hour display
1: 24 hour display
OFF For selecting whether to display REMAIN (remaining tape
2L time) on the superimposed display of the HD SDI MONITOR/
1L SD SDI MONITOR/VIDEO OUT3 connector.
R/TTL 0: The remaining tape time is not displayed.
1: The remaining tape time is displayed on the second line.
2: The remaining tape time is displayed on the first line.
3: The remaining tape time is displayed on the first line, and
the total tape time is displayed on the second line.
<Notes>
1. When setting 1 (2L) is selected, the remaining tape time will
not appear when "0 (TIME)" has been selected as the setup
menu item No.006 (DISPLAY SEL) setting.
2. When setting 3 (R/TTL) is selected, the remaining tape
time and total tape time will not appear when "0 (TIME)"
has been selected as the setup menu item No.006
(DISPLAY SEL) setting.
OFF This sets whether the phase is to be synchronized between
two decks.
ON
0: The phase is not synchronized. The edit points will be off
by several frames but editing can be entered more quickly.
1: The phase is synchronized.
performed.
OFF This selects whether the time code and other displays are to
be superimposed onto the HD SDI MONITOR, SD SDI
ON
SW MONITOR and VIDEO OUT3 connector signals.
0: Displays are not superimposed.
1: Displays are superimposed.
2: Pressing PLAY button after pressing SET button (front
panel bottom e ) selects the super display ON/OFF.
<Note>
Pressing SET button after pressing PLAY button results in
same operation as in normal PLAY button pressing.
Description
the setup menu item
Error-free editing can be
No.004