Table of Contents
Advertisement
Setup menus
USER menu
<BASIC>
No.
011
015
020
022
023
The underline on the setting item denotes the initial setting.
(continued)
Item
Setting
Superimposed
Superimposed
No.
display
display
CU-ROLL
0000
TIME
:
0005
:
0015
AUTO STEP
0000
0001
SYS FORMAT
0000
0001
PB FORMAT
0000
0001
FORMAT SEL
0000
0001
0002
0003
0004
0005
0006
– 74 –
0s
For setting the preroll time in the MULTI CUE mode.
This can be set in 1-second increments from 0 to 15 seconds.
5s
:
15s
OFF
In ERROR LOG function, warning can be stored up to 99
ON
messages. If it exceeds the capacity, processing is selected
for storing the messages.
0: Upper limit is 99 messages. Warning messages generated
after that are not stored.
1: 99 messages are stored. Warning messages given after
that are stored in the place of 99th message. Warning
messages already stored are then shifted down in the
direction of smaller numbers in order.
1080i
This selects the recording format of this unit.
720p
0: 1080i is selected.
1: 720p is selected.
MANUAL
This selects the tape playback format.
0: Comply with the setup menu No.023 (FORMAT SEL)
AUTO
setting.
1: Comply with the format recorded in the tape.
For selecting the format when "MANUAL" has been selected
HD_LP
as the setup menu item No.022 (PB FORMAT) setting. If
HD-SP
"AUTO" has been selected as the setting, the playback start
422
format is selected, and when the tape is played, its format is
411
automatically detected and the format of the tape being
420p
played is adopted.
DV
0: The DVCPROHD-LP format is selected, and the setup
DVCAM
menu item No.020 (SYS FORMAT) setting is followed.
1: The DVCPROHD format is selected, and the setup menu
item No.020 (SYS FORMAT) setting is followed.
2: The DVCPRO50 (422) format is selected.
3: The DVCPRO (411) format is selected.
4: The DVCPROP (420p) format is selected.
5: The DV format is selected.
6: The DVCAM format is selected.
Description
Advertisement
Table of Contents
