Panasonic AJ-HD1500P Operating Instructions Manual page 83

Setup menus
USER menu
<EDIT>
No.
310
311
312
320
321
322
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
JOG FWD 0000
MAX 0001
0002
JOG REV 0000
MAX 0001
0002
POSTROLL 0000
TM 0001
0002
0003
0004
0005
EDIT 0000
RPLCE1 0001
0002
0003
EDIT 0000
RPLCE2 0001
0002
0003
EDIT 0000
RPLCE3 0001
0002
0003 CH1+CH2
– 83 –
+4.9 This sets the maximum JOG FWD speed.
+2 0: +4.9 speed
+1 1: +2 speed (+1.85 speed for all formats except DVCPROHD-LP)
2: +1 speed
<Notes>
• The maximum speed is set to +2
formats except DVCPROHD-LP) when the dial on the front
panel is operated.
• At any speed setting other than 0 (+4.9 ), the phase cannot
be synchronized from an editing controller which synchro-
nizes the phase using the JOG command.
–4.9 This sets the maximum JOG REV speed.
0: –4.9 speed
–2
–1 1: –2 speed (–1.85 speed for all formats except DVCPROHD-LP)
2: –1 speed
<Note>
The maximum speed is set to –2 (–1 speed for all formats
except DVCPROHD-LP) when the dial on the front panel is
operated.
0s This sets the postroll time.
1s Any time from 0 to 5 seconds can be set in 1-second units.
2s
3s
4s
5s
This sets the channel assignments for the controller's analog
N-DEF
CH1 audio preset when editing the digital audio of the VTR using a
CH2 controller which does not have a digital audio edit preset
CH1+2 control function.
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
N-DEF The same type of setting as setup menu No. 320. This selects
the channel concerned when the CH2 edit preset is set in
CH1
compliance with the ON or OFF presetting for the analog
CH2
CH1+2 audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
N-DEF The same type of setting as setup menu No. 320. This selects
the channel concerned when the CH3 edit preset is set in
CH1
CH2 compliance with the ON or OFF presetting for the analog
audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
Description
(+1.85 speed for all