Diag-Menu Display; Diag-Menu Operation Method - Panasonic DVCPRO HD EX AJ-HD1200AP Service Manual

7. DIAG-MENU DISPLAY

The DIAG-MENU is the menu for investigating the status of the VTR, and it has the indicated information.
• Hour meter display (HOUR METER information)
• Software (Microcomputer) version display (SOFT VERSION information)
• DIF status and UID display (This information only displayed, when IEEE1394 IF Board (AJ-YAD120AG) has
been installed.
• PLD version display (PLD VERSION information)

7-1. DIAG-MENU Operation Method

1. Press the "EJECT" button on the Front Panel and simultaneously set the "LOCAL/MENU/REMOTE" switch
on the Front Panel to the "MENU" position so that the "HOURS METER" displays on the monitor and Front
Display.
2. Press the "SEARCH" button so that the "SOFT VERSION" displays on the monitor TV and Front Panel.
3. Press the "SEARCH" button so that the "DIF STATUS" and "UID Number" are displayed on the monitor
and Front Display.
4. Press the "SEARCH" button again then the display changes to the "HOURS METER" display.
5. The Diag Menu is closed by setting the "LOCAL/MENU/REMOTE" switch to the "LOCAL" or "REMOTE".
<Display on Monitor >
DIAG-MENU
Ser. * * * * * * * *
* H00
H01
H02
H03
H04
H11
H12
H13
H14
H30
END
DIAG-MENU
<NTSC>
SYSIF
AVDV
SERVO
END
DIAG-MENU
Mode CNT
MY ID
ROOTID
IRM ID
RCV ID
GAP CNT
EUI-64 0080458212345678
HOURS METER
OPERATION 12H
DRUM RUN 4H
TAPE RUN 2H
THREADING 252T
F LOADING 174T
DRUM RUN r 4H
TAPE RUN r 2H
THREADING r 252T
F LOADING r 174T
POWER ON 10T
Press
"SEARCH" Button
SOFT VERSION
1.17 D3A4
1.23 D3D3
1.20 FF95
Press
"SEARCH" Button
DIF STATUS 1
2
0
1
1
5
<Front Display>
H0 00 ** **
H0 10 ** **
H0 20 ** **
H0 30 ** **
H0 40 ** **
H1 10 ** **
H1 20 ** **
H1 30 ** **
H1 40 ** **
H3 00 ** **
IF 1 1 7 0 0 0
Au 1 1 7 0 0 0
Sr 1 2 0 0 0 0
Press
"SEARCH"
Button
INF-11
Pressing
"UP" or
"DOWN"
Button
Pressing
"UP" or
"DOWN"
Button