Chapter 2: Getting Started; Hardware / Software Requirements; Installation - Visonic Remote Programmer Software User Manual

Chapter 2: Getting Started

2.1 Hardware / Software Requirements

In order to run Remote Programmer, you need the following resources:
· PC (2GHz or higher)
· Microsoft® Windows® 7 (32-bit) or XP.
· 1GB RAM
· At least 20 MB of free disk space.
For best performance, use a display driver with a resolution of at least 1024 x 768
·
pixels.

2.2 Installation

Install an internal modem in the computer, or use an RS-232 cable to connect an
external modem to one of the computer's COM ports as instructed in the manual
supplied with the modem. Then connect the modem to the telephone line. The
modems suitable for use with Remote Programmer are listed in the Modem field in
the Communications tab of the Options window (refer to 7.1.2 Remote
Connection).
To Install Remote Programmer
1. Start Windows. Close all running applications, if any.
2. Insert the Remote Programmer DVD into the DVD drive.
If your system includes the AutoPlay feature, the setup program starts
automatically. Otherwise, proceed as follows:
3. From the Start menu, select Run; the Run dialog box appears.
4. In the Run edit box, type the drive letter of the DVD drive you are using,
followed by a colon, backslash, and the word "setup", for example:
"d:\setup".
DE5450S Remote Programmer Guide Rev. 8
Chapter 2: Getting Started
3