Chapter 9: Two Download Codes; How It Works - Visonic Remote Programmer Software User Manual

Chapter 9: Two Download Codes

This document explains the use of two download login codes - located in the
control panel (for further details, see PowerMax/PowerMaster User Guide) - used
for the two types of access codes, as follows:
· Master Installer – used to gain access to all the data in the control panel
(usually used by the central station).
· Installer – used to gain access to all the data in the control panel except for
central station data.

9.1 How It Works

Although Installers and Master Installers use the same software, access levels are
determined by the PowerMax/PowerMaster control panel.
There are two Download code types, as follows:

Master Download code

Installer Download code
When performing login using the download codes, the control panel will check the
download code to verify whether it is a Master download code or an Installer
download code.
In the event that the two download codes are identical, the control panel will
respond using the lower privilege (in this case the Installer privilege).
If the control panel responds with the Master privilege, the software is assigned
master privilege and will display all the fields.
If the control panel responds with the Installer privilege, then the software is
assigned Installer privilege and will hide all the central station data.
DE5450S Remote Programmer Guide Rev. 8
Chapter 9: Two Download Codes
61