Disconnecting From The Powermax/Powermaster - Visonic Remote Programmer Software User Manual

To Update Customized Zone/Sensor Names
1. From the Communications menu, select Customize Zone/Sensor
Names; the Customize Zone/Sensor Names dialog box appears.
Figure 7-11: Customize Zone/Sensor Names Window
2. In the Current name list, select the name you want to change.
3. In the New Name edit box, type the new name (15 characters max.).
4. Click Send to update the Remote Programmer,
Or
Click Exit to exit the program.

7.4 Disconnecting from the PowerMax/PowerMaster

From the Communications menu, select Logout,
Or
Click the Logout icon
DE5450S Remote Programmer Guide Rev. 8
Chapter 7: Connecting to the Control Panel
on the toolbar.
57