Panel Status/Trouble - Visonic Remote Programmer Software User Manual

Chapter 6: Data Details Tables
Condition
NOT UPDATED
HEAT OPEN
HEAT ALARM
SMOKE OPEN
SMOKE TROUBLE
SMOKE ALARM

6.19 Panel Status/Trouble

This table is applicable to the PowerG models.
The Panel Status/Trouble screen displays diagnostic information that is uploaded
from the Control Panel.
A Yes indication alerts that a condition exists that needs checking. A No indication
means that the condition is normal.
Condition
STATUS 1/
STATUS 2
LOW BATTERY
NOT ACTIVE
FUSE TROUBLE
LINE FAILURE
42
Description of Yes state
Device configuration has not been updated yet
from the control panel.
Extreme heat is occurring.
Heat alarm is occurring, for example in extreme
heat. The alarm state ends only after disarming
and then rearming the system.
Smoke or fire is occurring.
The zone's detector needs to be checked.
Smoke alarm is occurring, for example, a fire is
burning. The alarm state ends only after
disarming and then rearming the system.
Description
Armed/Disarmed, Ready/Not Ready
Control Panel's battery needs replacement or is
not connected.
Control Panel is not transmitting.
Fuse has shut the current circuit and will reset
automatically.
Telephone line or network (such as GSM) is
DE5450S Remote Programmer Guide Rev. 8