Chapter 1 Getting Started; Introduction - Visonic PowerLink2 User Manual

Chapter 1 Getting Started

Introduction

The Visonic PowerLink2 enables you to view and control the Visonic PowerMax
Security System over the Internet. The PowerLink2 is compatible with the
PowerMaxPro control panel version 5.2.6C and above, PowerMaxComplete control
panel version 2.0.6C and above, and with all control panels that support Partition 2.
It provides the following advanced features:
Event notifications to Email and mobile phones.
•
Display of the status of the PowerMax Security system including system mode,
•
detector status and troubled accessories.
Display of the current status of the home automation devices controlled by the
•
PowerMax Security system.
In-House video viewing via Wired or Wireless cameras around the house.
•
Recorded alarm time video of all cameras from the latest alarm.
•
Local storage of video camera images on your computer.
•
Remote arming and disarming of the PowerMax Security system.
•
All control and view options are enabled via a secured Web Interface, accessible from
anywhere around the globe whether connected by a PC or a cellular phone.
The Visonic PowerLink2 has a built-in Secured Web Server, which ensures that all
private information is fully secured. The web interface does not require any software
to be downloaded into the remote computer, allowing users to operate the browser at
maximum-security level.
4
Getting Started