Visonic Remote Programmer Software User Manual page 43

Chapter 6: Data Details Tables
To Enroll a Keyfob Transmitter to the Control Panel
In order to perform this procedure , collect the following items together:
A PowerMax/PowerMaster control panel, which will be used to pass the
keyfob identifying information from the keyfob through to the PC and from
there to the customer's control panel.
The keyfob transmitter that is to be enrolled and sent to the customer.
1. Enroll the keyfob transmitter to the control panel as detailed in the
PowerMax/PowerMaster Installer Guide.
Note: Remember the keyfob number to which you enrolled the keyfob.
2. Connect and log in via serial connection to the panel as detailed in
chapter 7: "Connecting to the Control Panel".
3. Upload the keyfob data from the panel.
4. In the Keyfob Enrollment table, enter the keyfob ID, the sync. counter and
the sync. counter backup numbers displayed on the screen next to the
keyfob number you enrolled the keyfob to.
5. Log out and disconnect from the control panel.
6. Connect and log in to your customer's PowerMax/PowerMaster control
panel.
7. Click the Options icon in the tool bar or select Options in the View
menu.
8. Select the Data tab.
9. Check the Send updated data immediately checkbox.
10. Enter the keyfob ID, the sync. counter and the sync. counter backup
numbers to the relevant keyfob in the Keyfob Enrollment table.
Every cell you update will be automatically downloaded to the customer's
control panel. (Be sure not to change other parameters.)
11. Logout and disconnect.
Now all you have to do is to send the keyfob transmitter to your customer!
36 DE5450S Remote Programmer Guide Rev. 8