Table of Contents
Advertisement
Manually Checking for Updates
Note:
During installation of the update:
• DO NOT turn off or unplug the device.
• Your Wi-Fi and Internet connections won't be available.
When the installation is complete, you will need to reconnect to Wi-Fi. (See "How Do I Connect to
Wi-Fi?" on page 115.)
1.
Log in to the home page.
2.
Make sure you're connected to 3G or 4G.
3.
Click
Advanced Settings
4.
Click
Device > Basic
5.
Click
Check for updates now
available.)
Installing the updates
To install available updates, after you've manually checked for updates:
1.
Make sure your device is connected to the AC charger or computer through the micro-USB
cable.
Note:
If you'll be using USB for data transfer (and not just for charging the device), you must install the
device driver. (See "Making a Tethered Connection" on page 27.)
2.
Click
Update options
3.
Read the information in the Software Installation Options window.
4.
To install the update, click
— or —
If you are not in a strong signal area, make a note of the URL displayed in the window and click
I'll get the update later
and then follow the steps in "Upgrading Firmware From a File" on page 59.
5.
When the installation is complete, reconnect to Wi-Fi. (See "How Do I Connect to Wi-Fi?" on
page 115.)
58
Using Your Device
(
).
.
. (The message next to the button indicates whether updates are
.
Download and install now
. At a later time, access the URL to download the update to your computer,
.
Advertisement
Table of Contents
