Sierra Wireless Overdrive Pro 3G User Manual page 108

Enter a number between 2 and 10080.
● Max DHCP Clients
— This is the number of DHCP addresses that can be assigned and active at one
time. It's recommended you set this to a number greater than the number of Wi-Fi users.
● DNS Mode
— This specifies how the DNS servers (that the DHCP clients are to communicate with)
are obtained. (See "DNS Mode" on page 101.)
● DHCP Static IP Assignment List
your network, and view the static IP assignment list. (See "DHCP Static IP Assignment List" below.)
DHCP Static IP Assignment List
With DHCP, IP addresses are assigned dynamically; devices typically don't have a permanent
IP address.
However, in some cases you might want to assign a static (permanent) IP address to a device, while
still using DHCP for the rest of the devices on your network. This is also known as "DHCP reservation."
You might want to do this with, for example, a Web server, FTP server, or media server.
Viewing the Static IP Assignment List
1.
Log in to the home page.
2.
Click
Advanced Settings > Router > LAN
3.
Make sure DHCP is enabled (
4.
Click DHCP Static IP Assignment List
Assigning an IP Address Based on a MAC Address
1.
Follow the above steps to display the DHCP Static IP Assignment List window.
2.
In the
Hostname
3.
In the MAC Address
see "Finding the MAC Address" on page 122.)
4.
In the IP Address
5.
Select the Enable
6.
Click .
Add
7.
Click .
Save
Removing an IP Address Based on a MAC Address
1.
Click
DHCP Static IP Assignment List
2.
To keep the device information in the list (in case you want to re-enable DHCP for this MAC
address later on), clear the
— or —
To remove the device from the list:
Click the row that you want to remove. A row of buttons (
Click .
Delete
100 Settings
— You can assign a permanent (static) IP address to a device on
DHCP Server
.
field, enter a meaningful description of the device.
field, enter the MAC address of the device. (If you don't know this address,
field, enter the IP address you want to assign to the device.
check box to have the device use the designated IP address.
on the
Enable check box.
.
).
panel of the
LAN Router
Delete
tab.
, OK , Cancel ) appears.