Table of Contents
Advertisement
● Import Router Settings
page 108.)
● Export Router Settings
page 108.)
● Update Firmware from File
Firmware From a File" on page 59.)
● Standby Timer on Battery
"Standby (Low Power) Mode" on page 45.)
● TRU-Install
— This feature installs the necessary drivers the first time you connect your device to
your Windows or Mac computer through the micro-USB cable. (For information on this feature,
see "TRU-Install" on page 26.)
● Check for Updates
and
(See "Automatically Checking for Updates" on page 57 and "Manually Checking for Updates"
on page 58.)
Display Panel
From the
panel of the
Display
To access this panel:
1.
Log in to the home page.
2.
Click
Advanced Settings
3.
Click
Device > Display
From this window, you can view or adjust these settings:
● Power Button LED
— You can enable the power button light on the device. (See "Enabling and
Disabling the Power Button LED" on page 68.)
● LCD Backlight
— You can turn the LCD on or off. (See "Turning the LCD On or Off" on page 67.)
● Turn Backlight Off
— This setting specifies how soon the LCD goes dormant. (See "Setting the
LCD Timeout" on page 67.)
● Backlight Settings
— You can adjust the brightness of the LCD. (See "Setting the LCD
Brightness" on page 67.)
microSD Card Panel
1.
Log in to the home page.
2.
Click
Advanced Settings
3.
Click
Device > microSD Card
From this window, you can view or adjust these settings, or perform the following actions:
● Status
— This field reflects the status of the microSD card slot (for example, the slot is disabled,
or a card is detected).
— You can import configuration settings. (See "Importing Settings" on
— You can export configuration settings. (See "Exporting Settings" on
— You can upgrade the device firmware from a file. (See "Upgrading
and
— You can enable standby (low power) mode. (See
On AC Power
Check for updates now
— You can check for updates to your device.
tab, you can configure settings for the device LCD.
Device
(
).
.
(
).
.
Settings
73
Advertisement
Table of Contents
