Section 3A
Setting Up Your Device
Device Setup (page 20)
Account Setup (Activation Wizard) (page 21)
Changing the Password and Settings (page 22)
Device Setup
1.
Install the battery, as described in "Installing the Battery" on page 10.
2.
Connect the device to the AC charger, as described in "Using the AC Charger with Your Device's
micro-USB Port" on page 12.
3.
Plug the AC charger into an electrical outlet.
4.
Charge the device until the battery icon is full (
Important:
Connecting to the Network
Make sure you are in a Sprint 3G or 4G coverage area.
1.
(Go to http://www.virginmobileusa.com/check-cell-phone-coverage to view the coverage
map.)
2.
If you have a LAN connection, disconnect it.
3.
Make sure your computer's Wi-Fi is turned on.
4.
If the device LCD displays "Charging," "Charged," or "Powered off," press and hold the power
button
for two seconds.
5.
Wait until the device LCD displays "Connect your computer to Wi-Fi network," followed by the
network name (SSID) and password. This may take several seconds.
20
Getting Your Device Ready
).