Resetting The 3G And 4G Configurations To Default Settings - Sierra Wireless Overdrive Pro 3G User Manual

● MSID
(Mobile Station ID) — Also known as IMSI (International Mobile Station Identity), the MSID is
an identifier of a device on the 3G network.
● NAI
(Network Access Identifier) — This is your User ID for accessing the 3G network.
● PRL Version
— The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels and network carrier used by the 3G modem.
Tip: You can view the 3G connection status on the "Network Status" LCD information screen. (See "LCD
Information Screens" on page 17.)

Resetting the 3G and 4G Configurations to Default Settings

Note: Reset the configurations only if instructed by a Virgin Mobile representative.
After a configuration reset:
• You must go through the device setup (page 20) and 3G activation. (The latter starts automatically.)
• Any changes you've made to the settings are lost.
1.
Log in to the home page.
2.
Click Advanced Settings > Device > About
3.
Click
Reset Device to Factory Defaults
4.
When prompted, enter the SPC (Service Programming Code). (If you don't know your SPC,
contact your service provider.)
To be able to establish a data connection after you've reset the device to factory defaults, you must
first:
1.
Go through the device setup (page 20).
2.
Go through 3G activation or, if using 4G, use pay-as-you-go.
92 Settings
.
.