Charging The Device - Sierra Wireless Overdrive Pro 3G User Manual

To connect the device to your computer:
1.
Insert the larger end of the micro-USB cable into your computer.
2.
Insert the other end of the cable into the micro-USB port on the side of your device.
Note: If you're having problems, see "Cannot Connect Through USB" on page 128.

Charging the Device

You need to recharge your device's battery periodically. You can continue using your device while it is
charging.
The faster method is to connect the device to the AC charger. (See "Using the AC Charger with Your
Device's micro-USB Port" below.) Alternatively, you can connect the device to your computer, although
this charges more slowly. (See "Charging Through Your Computer" on page 13.)
Using the AC Charger with Your Device's micro-USB Port
1.
Insert the larger end of the micro-USB cable into the AC charger.
2.
Insert the other end of the cable into the micro-USB port on the side of your device.
3.
Insert the AC charger into an electrical outlet.
When charging, the LCD shows
xx% complete" (where "xx" is a number value).
When the device is charged, the LCD shows:
●
(if the device is on)
●
and the message "Fully charged" (if the device is off).
12 Your Device
and, if the device is off, displays a message "Charging...