112
Figure 16: Example configuration for an IPX network.
Head Office Router
Network = 401
Netware
File Server
Table 13: Example configuration parameters for an IPX network .
Configuration Parameter
Ethernet interface
Ethernet encapsulation
Novell network number for Ethernet
IPX circuit over Ethernet
PPP interface
Novell network number for PPP
IPX circuit over PPP
Configuring IPX
This example (Figure 16 on page 112) illustrates the steps required to configure
a pair of AR410 routers to create a Novell® IPX internetwork, using the
router's command line interface. In this scenario, PCs at a remote office need
access to a Novell file server at the Head Office site. The two sites are connected
by a PPP link over a wide area link—either a dedicated leased line or an ISDN
call.
Network = 129
PPP Data Link
Head Office Router
eth0
802.3
401
1
ppp0
129
2
AR400 Series Router User Guide
Remote Office Router
Network = 12
Remote PC
Remote PC
Remote Office Router
eth0
802.3
12
1
ppp0
129
2
Software Release 2.7.1
C613-02021-00 REV F
UGIPX1_R