Hardware Features - Allied Telesis AR Series Hardware Reference Manual

26
Set asynchronous port default to:
• 9600 bps
• 8 data bits
• 1 stop bit
• No parity
• Hardware flow control.

Hardware Features

All models have a DIP switch, which is located on the router's rear panel. DIP
switch functions are shown in Table 10 on page 26.
Table 10: Functions of the rear panel DIP switch on AR300 Series routers .
DIP Switch Settings
1 2 3
Any Any Any
Off Off Off
On Off Off
Off On Off
On On Off
Off Off On
On Off On
Off On On
On On On
The following figures and tables show the layout of the base CPU board, and
the locations and functions of the board-mounted jumpers, for each AR300
Series router:
AR300 Series Model
AT-AR300L(S)
AT-AR300(S)
AT-AR310(S)
AT-AR320
AT-AR330
AT-AR350
AT-AR370(S)
AT-AR370(U)
AT-AR390
AT-AR395
4 Function
On Diagnostics
Off Normal boot (default)
Off Reserved
Off Remote configuration
Off Reserved
Off Factory test mode
Off Remote configuration if no configuration script
Off Factory test mode
Off Reserved
CPU Board Layout
Figure 9 on page 27
Figure 10 on page 28
Figure 11 on page 28
Figure 12 on page 29
Figure 13 on page 30
Figure 14 on page 31
AR Router
Jumper Functions
Table 11 on page 27
No user-configurable jumpers.
No user-configurable jumpers.
Table 12 on page 29
Table 13 on page 30
Table 14 on page 31
C613-03031-01 REV C