Using The Built-In Editor - Allied Telesis AR410 User Manual

Operating the router
Software Release 2.7.1
C613-02021-00 REV F

Using the Built-in Editor

The router has a built-in full-screen text editor for editing script files stored on
the router file subsystem. Using the text editor you can run script files
manually, or set script files to run automatically at router restart, or on trigger
events. Figure 10 on page 67 shows a example screen shot of the text editor. To
start the editor with a new file or an existing file, enter the command:
EDIT [filename]
Figure 10: The editor screen layout.
The editor uses VT100 command sequences and should only be used with a
VT100-compatible terminal, terminal emulation program or Telnet client.
To display editor Help at any time while in the editor press [Ctrl/K,H]; that is,
hold down the Ctrl key and press in turn the K key then the H key.
For more information about the inbuilt editor, see the Operation chapter in the
Software Reference.
67