Allied Telesis AR410 User Manual page 32

32
RESTART ROUTER
2. Login as a Security Officer
To login as the user with Security Officer privilege called "CIPHER", use
the command:
LOGIN CIPHER
And then enter the password for "CIPHER", "sbr4y3".
3. Enable system security
To enable system security, use the command:
ENABLE SYSTEM SECURITY
4. Create an RSA key pair for this router.
To create an RSA key pair, use the command:
CREATE ENCO KEY=0 TYPE=RSA LENGTH=1024
5. Set the router's distinguished name.
To set the router's distinguished name to
"cn=router1,o=my_company,c=us", use the command:
SET SYSTEM DISTINGUISHEDNAME="cn=router1,
o=my_company,c=us"
6. Set the UTC offset.
To set the Universal Coordinated Time to inform the router that the
difference between local time and GMT is 7 hours, use the command:
SET LOG UTCOFFSET=7
7. Create a self-signed certificate for the router.
To create a PKI certificate without contacting a CA for browsing to the GUI,
use the command:
CREATE PKI CERTIFICATE=cer_name KEYPAIR=0
SERIALNUMBER=12345 SUBJECT="cn=172.30.1.105,
o=my_company, c=us"
Using this command creates a certificate that is only suitable for secure router
management via the GUI. A pop-up message will appear in the browser
window warning that the certificate is not issued by a trusted authority. You
should create a certificate via a Certification Authority if you want to use SSL
with the Load Balancer. For details, see the Public Key Infrastructure (PKI)
chapter of your Software Reference.
8. Load self-signed router certificate
To load the signed router certificate onto the router, use the command:
ADD PKI CERTIFICATE=cer_name LOCATION=cer_name.cer
TRUST=YES
9. Enable SSL on the HTTP server
To enable SSL on the HTTP server with previously created SSL Key and the
port 443, use the command:
SET HTTP SERVER SECURITY=ON SSLKEY=0 PORT=443
AR400 Series Router User Guide
Software Release 2.7.1
C613-02021-00 REV F