Appletalk - Allied Telesis AR410 User Manual

118
4. Save configuration
To save the new dynamic configuration as a script, enter the command:
CREATE CONFIG=IPXFILT.SCP

AppleTalk

The AppleTalk network architecture provides internetworking of Macintosh
computers and other peripheral devices using LocalTalk media. AppleTalk
allows seamless access to network services such as file servers and printers
from the Macintosh desktop environment. The open nature of the architecture
has enabled the AppleTalk network system to extended support to other media
types (for example EtherTalk for Ethernet media), and a mixture of both Apple
and non-Apple network devices on the same AppleTalk network.
To create an AppleTalk port (interface) associated with the vlan11, enter the
command:
ADD APPLE PORT INTERFACE=vlan11
To display information about the ports configured for AppleTalk (Figure 19 on
page 118), enter the command:
SHOW APPLE PORT
Figure 19: Example output from the SHOW APPLE PORT command.
Appletalk Port Details
------------------------------------
Port Number .............. 1
Interface ................ vlan11
ifIndex .................. 1
Node ID .................. 217
Network Number ........... 22
Network Range Start ...... 22
Network Range End ........ 22
State .................... ACTIVE
Seed ..................... NO
Seed Network Start ....... 0
Seed Network End ......... 0
Hint ..................... YES
Hint Node ID ............. 179
Hint Network ............. 22
Default Zone ............. -
Zone List is Empty
------------------------------------
To interpret output from the SHOW APPLE PORT command see the AppleTalk
chapter in the Software Reference.
AR400 Series Router User Guide
Software Release 2.7.1
C613-02021-00 REV F