Table of Contents
Advertisement
Chapter 10, Signaling Encoder (AF Generator 2)
Digital Paging Encoder
AFGen2 To
Audio Out
Bursts
Data Rate
Error Bit
320
This field, audio frequency generator 2 to, contains two fields:
•
The upper field determines whether the Digital Paging Encoder's signal modulates the
RF Generator, or is output through the AUDIO OUT connector.
•
The lower field sets the amplitude (including Off).
Audio output coupling selects ac or dc coupling of the encoder to the AUDIO
OUT connector when the upper
Operating Considerations
This field should be set to
connector and low data rates.
This field defines the number of digital data streams output each time
selected. This function works only when the
This field specifies how fast the data stream is output in bits-per-second. Common
data rates; POCSAG 512, 1200: GSC (GOLAY) 300, 600.
This field enables you to cause an error for a specific bit in the encoded message
stream.
field is set to
AFGen2 To
for best results when using the AUDIO OUT
DC
Send Mode
.
Audio Out
is
Send
field is set to
.
Burst
Advertisement
Table of Contents
