Table of Contents
Advertisement
Chapter 6, Call Processing Subsystem
The CALL CONTROL Screen
Called Number:
Chan:
Cntl Channel
[] Connect
120
This field displays the called phone number, in decimal form, received from the
mobile station on the reverse control channel when the mobile station originates a
call. The
Called Number:
to
and a reverse control channel message has been decoded when the mobile
Data
originates a call.
is divided into two fields:
Chan:
•
The left-hand field displays the voice channel number assignment being used by the
Test Set and the mobile station. A numeric value would only be displayed when the Test
Set's Connected annunciator is lit (connected state). A "-" is displayed if a mobile
station is not actively connected on a voice channel.
•
The right-hand field (highlighted field) is used to enter the voice channel number which
will be assigned to the mobile station by the Test Set as either an initial voice channel
assignment or as a handoff voice channel assignment.
This field is used to set the control channel number used by the Test Set.
The
field is an immediate action field. That is, whenever the
Cntl Channel
field is changed, the change is reflected immediately in the
Cntl Channel
physical configuration of the Test Set (the control channel is immediately de-
activated, reconfigured, and then re-activated to reflect the change) and causes an
immediate change to the current state of the Call Processing Subsystem (the state
is set to
).
Active
When lit, the
Connect
to the Test Set on a voice channel.
field is displayed only when the
annunciator indicates that the mobile station is connected
field is set
Display
Advertisement
Table of Contents
