To Change The Measurement’s Unit-Of-Measure - HP 8921A User Manual

Cell site test set

Hide thumbs Also See for 8921A:

Table of Contents

Chapter 3, Operating Overview

Displaying Measurements

To Change the Measurement's Unit-of-Measure

1. Position the cursor in front of the present unit-of-measurement.

2. Press the key labeled with the desired unit.

All measurements allow you to change the associated unit-of- measure. For

instance; the

measurement is usually displayed in Watts, but can be

changed to display in mW, dBm, V, mV, or dB V.

Select mW by pressing SHIFT, ENTER.

For example; to display transmitter power in units of dBm instead of Watts:

1. Move the cursor in front of the unit-of-measure for the TX Power measurement (W).

2. Press the dBm key. The measurement value is changed immediately to display in dBm.