Send Mode; Standard; Stop Dsat (Fvc); Stop Filler (Focc) - HP 8921A User Manual

Cell site test set

Hide thumbs Also See for 8921A:

Table of Contents

Chapter 10, Signaling Encoder (AF Generator 2)

AMPS-TACS NAMPS-NTACS Encoder

Send Mode

This field selects the mode used when

Single outputs the entire message once.

Burst outputs the Message the number of times specified in the Bursts field.

Cont causes the message to be output continuously until Stop is selected.

Step is not used in the AMPS-TACS mode.

This field selects the signaling standard used for your radio. The standard values

used for each signaling format are automatically filled-in when the standard is

Selecting this field stops the message being output.

This field is available only in NAMP-NTAC mode.

Selecting this field stops the digital supervisory audio tone being output.

Selecting this field stops the

is selected to output the message.

information from being output after