Table of Contents
Advertisement
Chapter 14, Oscilloscope Screen
Using the Oscilloscope
Using the Oscilloscope
Selecting the Oscilloscope's Input
Figure 86
Oscilloscope Input Indicator
398
The oscilloscope's input is determined by the
ANALYZER, TX TEST, or DUPLEX TEST screens.
oscscrn1.wmf
Using the Scope To Field
The
field in the AF ANALYZER screen allows you to look at the
Scope To
signal at different stages in the AF Analyzer's process. (Refer to the AF
ANALYZER screen description to understand the different
Except for the
setting, all the choices are capacitively coupled. If the signal
Input
to be measured is 1 Hz, use the
AF Anl In
setting to provide the needed dc coupling.
Input
field setting in the AF
choices.)
Scope To
Advertisement
Table of Contents
