Table of Contents
Advertisement
Chapter 23, TX Test Screen
Field Descriptions
Distn
Ext TX Key
Filter 1 and Filter 2
FM Deviation
IF Filter
502
This field displays the percent of distortion. The Distortion measurement is only
for a 1 kHz signaling tone.
This field controls a switch at the MIC/ACC connector. Its intended use is to
"key" an external transmitter.
See Also
Figure 117 on page 516
Filters 1 and 2 select a variety of standard and optional filters. Selecting either
field lists the choices available for that field.
See Also
Chapter 5, "AF Analyzer Screen"
This is the default measurement for this field. The type of measurement listed here
is dependent on the
AF Anl In
See Also
AF Anl In field description, on page 498
"Displaying Measurements" on page 57
This field selects the desired IF filter's bandwidth for modulated signals being
analyzed.
settings.
Advertisement
Table of Contents
