HP 8921A User Manual page 413

Parallel Data Strobe
Parallel Data
Strobe
Output Data Line
Data Output
(1 of 16)
Figure 90
+
LM 339M
-
+
Output Data
LM 339M
Fixed Ref-
-
erence
The field will also output data to the output data line comparators.
I/O Config
The field, however, is primarily intended to configure parallel data
I/O Config
lines as inputs or outputs. See the
Using the Radio Interface (Manual Operation)
Logic Voltage
Logic Voltage
External device should latch data on
Strobe POL Level to allow Output Data
time to settle.
Input Data field description, on page 406
Chapter 16, Radio Interface Screen
Strobe POL
High/Low
Pin 13
5 S
1
Pins 9 - 34
0
.
413