Saving and Recalling the Configuration
To save or recall front-panel setups
To save or recall front-panel setups
Ten memories are available to store front-panel setups. Saving front-panel
setups can save you time in situations where several setups are repeated
many times.
Press
.
1
Setup
To change the selected memory location, press either the left-most
2
softkey or turn the Entry knob.
Press the
softkey to save a front-panel setup, then press the
3
Save
softkey to recall a front-panel setup.
Recall
To reset the HP 54645A/D instrument setup
To reset the instrument to the default factory-preset configuration,
1
press
.
Setup
Press the
2
Default Setup softkey.
To reset the instrument to the configuration that was present before
3
pressing
Autoscale, press the Undo Autoscale softkey.
4-48