HP 54645A User's And Service Manual page 132

Table 4-1
HP 54645A Factory-Preset Default Configuration Settings
Configuration Item
Cursors
Trace memories
Graticule
Autostore
Time base
Display
Channels
Trigger Mode
Trigger Condition
Setting
Cursors off; time readout is selected; all cursors are set to time/voltage zero.
Both trace memory 1 and 2 are off; trace 1 memory is selected.
Grid set to Full
Off
Time reference center; main, not delayed sweep; vernier off; main and delay value 0;
100 s/div main time base; 500 ns/div delayed time base; sample rate is 200 MSa/s.
Vectors On, Display Mode Normal.
Channel 1 on, Position 0 V, Volts/Div 100 mV.
Auto Level, Coupling DC, Reject Off, Noise Reject Off.
Rising edge of channel 1
Saving and Recalling the Configuration
To reset the HP 54645A/D instrument setup
4-49