HP 54645A User's And Service Manual page 127

Saving and Recalling the Configuration
Using memories to save and recall configurations
Figure 4-17
Trace Memory Softkeys on HP 54645D with HP 54659B Measurement/Storage Module Installed
Setup memory
The HP 54645A/D has 10 separate setup memories that allow you to save the
current configuration of the instrument, including time base, threshold,
channel settings, measurement definitions, and, for the HP 54645D, labels
(not as independent label lists). These memories are non-volatile. They are
best used for saving instrument configurations that you need later to verify
the results of a change, or need regularly for test and troubleshooting.
4-44
Selects Selects
trace whether the
memory memory is on
(displayed) or
off
Saves Erases the
current selected
waveform to memory
the selected
memory
Sets the
HP 54645A/D to
the configuration
saved with the
waveform