To Autostore Multiple Single Events - HP 54645A User's And Service Manual

To Autostore Multiple Single Events

To Autostore single events, you first need to configure the instrument to do
single Autostores.
Press
1
Autostore
This causes the instrument to run.
Press to take a single autostored acquisition.
2
Single
After the single acquisition, the scope will stop.
You may want to press
3
Now pressing the
4
Single
single trigger.
Each single trigger will be added to the accumulated Autostore results on the
screen.
Run/Stop/Single/Autostore/Erase Operation
To Autostore Multiple Single Events
to put the instrument in Autostore mode.
to display a clean screen.
Erase
key will result in an autostored
4-37