To Save Or Recall Front-Panel Setups - HP 54616B User And Service Manual

Operating Your Oscilloscope

To save or recall front-panel setups

The automatic measurement functions do not operate on stored traces.
Remember, the stored waveforms are pictorial information rather than stored
data.
•
If you have not changed the oscilloscope setup, use the cursors to make
the measurements.
•
If you have changed the oscilloscope setup, press the Recall Setup softkey.
Then,use the cursors to make the measurements.
Trace memory operating hint
The standard oscilloscope has volatile trace memories. When you add an
interface module to the oscilloscope, the trace memories become nonvolatile.
To save or recall front-panel setups
There are 16 memories for storing front-panel setups. Saving front-panel
setups can save you time in situations where several setups are repeated
many times.
Press .
1
Setup
To change the selected memory location, press either the left-most
2
softkey or turn the knob closest to the Cursors key.
Press the
3 Save softkey to save a front-panel setup, then press the Recall
softkey to recall a front-panel setup.
2–34