HP 54645A User's And Service Manual page 290

Index
A
accessories
optional, 1–7
supplied, 1–5 to 1–9
accuracy
testing thresholds, 7–12
acquisition
and channels off, 2–24
buffer, 2–28
indicator for, 2–13 to 2–14
setting up with Autoscale, 2–18 to 2–19
single, 4–33
starting, 2–28
stopping, 2–28
acquisition memory
location of trigger event, 4–22 to 4–28
setting time reference in, 4–22 to 4–28
time base affects time to fill, 4–27
acquisition results
save in trace memory, 4–45
acquisition system
performance characteristics, 9–6
self-tests, 7–11
action to cause trigger, 3–4
Active Cursor, 2–30, 5–22
activity check during Autoscale, 2–20
activity indicators
for threshold test, 7–14
adjusting
display brightness, 1–4, 1–13
handle, 1–9
oscilloscope, 7–2
adjustments
display, 7–38 to 7–39
high-frequency, 7–29
low- frequency, 7–29
power supply, 7–30 to 7–32
Adv, 3–19 to 3–24
advanced trigger, 3–19 to 3–24
applications of, 3–14
setting up, 3–21
setup rules, 3–22
solve data acquisition problems, 3–21
aliasing
misleading information, 4–11
All Fields, 6–9
Alt Fld
See alternate fields
alternate fields, 6–5
ambient temperature, 7–29
analog channels
acquired, 2–25
applications of trigger
to complex situations, 3–14
to edges, 3–12
to patterns, 3–13
assemblies
ordering, 8–12 to 8–17
replacing on exchange program, 8–11
assigning labels, 4–54 to 4–57
associating circuit signals and input
channels, 4–53 to 4–58
attenuation factor
for probes, 2–23
Auto Single mode, 4–35, 4–38
auto-increment
in labels, 4–54
automatic measurements
time, 5–28 to 5–31
voltage, 5–32 to 5–34
automatic probe sensing, 2–23
Autoscale, 2–18 to 2–19
operation of, 2–20
performance characteristics, 9–9
try to display channels, 7–5 to 7–6
try to display trace, 7–4 to 7–5
undo, 2–18 to 2–19, 4–48
video, 6–4, 6–12
Autostore
and Erase, 4–38
and Single, 4–33
message, 10–3
average mode, 2–13
averaging, 5–10
Av indicator, 5–10
Average softkey, 5–10
B
bandwidth
to verify, 7–19 to 7–21
BenchLink for Microsoft Windows, 1–7
Berg strip, 7–9 to 7–10
best probing practices, 4–42
bezel
flexing on front panel, 8–9
BNC
cable assembly, 7–13
connector, 7–10
boards
removing the system board, 8–6
replaceable parts, 8–2
training, 1–7
brightness
adjusting display, 1–4, 1–13
C
cabinet
removing, 8–4
removing the handle, 8–9
cable
removing probe leads, 1–12
cables
calibration, to display, 8–6
calibration, to system board, 8–6
part number for, 1–5 to 1–9
probe, 1–11 to 1–12
ribbon, to display, 8–6
ribbon, to power supply, 8–8
ribbon, to system board, 8–5 to 8–6
calibration
adjustments, 7–29
self, 7–33 to 7–34
calibration cable
disconnect to remove display, 8–6
disconnect to remove system board, 8–6
take care when removing keyboard, 8–9
calibration point, 7–11
calibrator, 7–15, 7–34
cancel printing, 2–34
capacitance of impedance, 4–39 to 4–42
capture single-shot events, 4–33
carrying case, 1–7
center
time reference position, 4–22 to 4–28
changing channel order, 2–26
changing time reference, 4–22 to 4–28
channel problems, 7–5 to 7–6
channels
assigning labels to, 4–54 to 4–57
attach ground leads, 4–42
connecting to test, 7–13
enabled/disabled by Autoscale, 2–20
list of those off, 2–13 to 2–14
message, 10–7
order of, 2–26
performance characteristics, 9–3
positioning, 2–26
Index-1