HP 37717C Calibration Manual page 238

Figure 3-45
Table 3-5
Bit Rate/
Center Frequency
2048kHz
8448kHz
34368kHz
139264kHz
Performance Tests
Transmitted Jitter Amplitude Accuracy (Option UHK)
7. Check the Jitter accuracy for each value in Table 3-5. In each case, set the HP
37717C Rate and Spectrum Analyzer Center Frequency to the value given in column
1 of the table (Set the HP 37717C PATTERN to ALL ONES and jitter
AMPLITUDE to minimum after each change of Bit Rate). Set the HP 37717C
Jitter Modulation Frequency and Amplitude to the values given in columns 2 and 3
of the table. Fine-tune the amplitude to obtain the lowest carrier level on the Spectrum
Analyzer display and check that the jitter amplitude displayed on the HP 37717C is
between the limits given in columns 4 and 5 of Table 3-5.
Bessel Null Example
Range 1 Tx Jitter Amplitude Accuracy
Modulation
Frequency
2400Hz
10700Hz
4000Hz
4000Hz
Jitter Minimum
Amplitude (UI) Jitter (UI)
0.77
0.77
0.77
0.77
Maximum
Jitter (UI)
0.69 0.83
0.69 0.83
0.69 0.83
0.68 0.84
3-129