Recall Default Settings - HP 37717C Calibration Manual

Performance Tests
Introduction

Recall Default Settings

The Performance Tests require the HP 37717C to be set to a pre-defined (default)
state at the beginning of each test. The pre-defined default settings are listed in
Appendix A.
1. Using , display softkeys,
OTHER
and set up the
OTHER
display as shown
STORED SETTINGS
opposite.
2. Press to recall the
RECALL
instrument default settings.The instrument
display will blank for a few seconds while
the settings are recalled and the status
display will indicate stored settings number
0 recalled.
3-2