Set Time and Date
Date and Time Must Be Set
The date and time must be set because they are used in the FS100 file
naming function.
Step 1: Press the
Right
display appears on the screen as shown below:
09 / 15 / 05
11 : 21 : 13
V 1 . 0. 0
LCDLIGHT ON
Step 2: Use the
Down
the
navigation button to access the Set Date screen.
Right
Step 3: Use the
Up
highlighted value. Use the
highlight the Month, Day, and Year.
Step 4: When complete, press the rightmost Function button indicated
as
BACK
on the screen. The new date will be indicated on the
Setup Screen.
FS100 Portable DTE Recorder
navigation button several times until the Setup
SETUP
navigation button to highlight the date and press
SET DATE
09 / 15 / 05
MM / DD / YY
BACK
and
navigation buttons to change the
Down
Right
and
Quickstart
Left
navigation buttons to
25